Drilling fluids
From Wikimarcellus
| Revision as of 01:04, 21 December 2011 Tcopley (Talk | contribs) (Drilling fluids (aka drilling mud) is used as part of the process of drilling natural gas well bores) ← Previous diff |
Current revision Tcopley (Talk | contribs) (cat) |
||
| Line 1: | Line 1: | ||
| - | ''Drilling fluids'' (aka drilling mud) are used as part of the process of drilling natural gas well bores. Drilling fluid is often referred to as drilling mud, and either has an oil or water base. It can also have a gaseous base. These fluids serve to provide hydrostatic pressure to prevent formation fluids from entering a well bore. They also help cool the drilling bit and keep it clean by carrying away drill cuttings. It is also a medium to suspend drill cuttings when drilling is paused or equipment is moved in and out of the bore hole. The type of drilling fluid used serves to limit formation damage and corrosion. Water-based mud often is made from a clay gel. | + | ''Drilling fluids'' (aka drilling mud) are used as part of the process of drilling natural gas well bores. Drilling fluid is often referred to as drilling mud, and either has an oil or water base. It can also have a gaseous base. These fluids serve to provide hydrostatic pressure to prevent formation fluids from entering a well bore. They also help cool the drilling bit and keep it clean by carrying away drill cuttings. It is also a medium to suspend drill cuttings in when drilling is paused or else equipment is moved in and out of the bore hole. The type of drilling fluid used serves to limit formation damage and corrosion. Water-based mud often is made from a clay gel. |
| + | |||
| + | Drilling fluid should not be confused with [[fracturing fluid]]. The latter is used in [[hydro-fracturing]] a well after drilling concludes. | ||
| '''Other pages of interest''' | '''Other pages of interest''' | ||
| Line 13: | Line 15: | ||
| * [[BJ_Services]] | * [[BJ_Services]] | ||
| * [[Schlumberger]] | * [[Schlumberger]] | ||
| + | |||
| + | [[Category:drilling practices]] | ||
Current revision
Drilling fluids (aka drilling mud) are used as part of the process of drilling natural gas well bores. Drilling fluid is often referred to as drilling mud, and either has an oil or water base. It can also have a gaseous base. These fluids serve to provide hydrostatic pressure to prevent formation fluids from entering a well bore. They also help cool the drilling bit and keep it clean by carrying away drill cuttings. It is also a medium to suspend drill cuttings in when drilling is paused or else equipment is moved in and out of the bore hole. The type of drilling fluid used serves to limit formation damage and corrosion. Water-based mud often is made from a clay gel.
Drilling fluid should not be confused with fracturing fluid. The latter is used in hydro-fracturing a well after drilling concludes.
Other pages of interest
