Drilling locations
From Wikimarcellus
| Revision as of 01:50, 3 January 2011 Tcopley (Talk | contribs) ← Previous diff |
Current revision Tcopley (Talk | contribs) |
||
| Line 1: | Line 1: | ||
| - | '''Drilling locations''' are, when possible, organized into rectangular tracts, called ''units,'' that are typically about 640 acres in size (the number of acres in a one mile by one mile plot). | + | '''Drilling locations''' are, when possible, organized into rectangular tracts, called ''units,'' that are usually about 640 acres in size (the number of acres in a one mile by one mile plot). |
| In northeastern Pennsylvania [[Marcellus shale]] is typically best mined, or [[hydro-fracturing|fraced]], when the [[horizontal drilling|horizontal drill]] bit direction is driven north-northwest or south-southeast (i.e. approximately 10-15 degrees to the west of due north or, reciprocally, 10-15 degrees to the east of due south.) Mining can be done in other directions, too, but the north-northwest and due opposite direction are considered optimal. | In northeastern Pennsylvania [[Marcellus shale]] is typically best mined, or [[hydro-fracturing|fraced]], when the [[horizontal drilling|horizontal drill]] bit direction is driven north-northwest or south-southeast (i.e. approximately 10-15 degrees to the west of due north or, reciprocally, 10-15 degrees to the east of due south.) Mining can be done in other directions, too, but the north-northwest and due opposite direction are considered optimal. | ||
| - | Each 640 unit contains a [[pad drilling|well pad]], or operations area, approximately 5 acres in size. The well pad supports drilling and gathering, or pipeline, activity. Each pad generally supports approximately six individual wells that are drilled vertically to about 5,000 feet (if drilling the Marcellus) before turning horizontally. Horizontal or "lateral" legs tend to range from 3,500 feet to 5,000 feet in length, although new technology has supported legs that are up to 9,000 feet long. A variety of considerations, including geology, shale thickness, and costs related to the amounts of gas produced by the wells determine lateral lengths. | + | Each 640 unit contains a [[pad drilling|well pad]], or operations area, approximately 5 acres in size. The well pad supports drilling and gathering, or pipeline, activity. Each pad generally supports approximately six individual wells that are drilled vertically to about 5,000 feet (if drilling the Marcellus) before turning horizontally. Horizontal or ''lateral'' legs tend to range from 3,500 feet to 5,000 feet in length, although new technology has supported legs that are up to 9,000 feet long. A variety of considerations, including geology, shale thickness, and costs related to the amounts of gas produced by the wells determine lateral lengths. |
| [[Category:Drilling practices]] | [[Category:Drilling practices]] | ||
Current revision
Drilling locations are, when possible, organized into rectangular tracts, called units, that are usually about 640 acres in size (the number of acres in a one mile by one mile plot).
In northeastern Pennsylvania Marcellus shale is typically best mined, or fraced, when the horizontal drill bit direction is driven north-northwest or south-southeast (i.e. approximately 10-15 degrees to the west of due north or, reciprocally, 10-15 degrees to the east of due south.) Mining can be done in other directions, too, but the north-northwest and due opposite direction are considered optimal.
Each 640 unit contains a well pad, or operations area, approximately 5 acres in size. The well pad supports drilling and gathering, or pipeline, activity. Each pad generally supports approximately six individual wells that are drilled vertically to about 5,000 feet (if drilling the Marcellus) before turning horizontally. Horizontal or lateral legs tend to range from 3,500 feet to 5,000 feet in length, although new technology has supported legs that are up to 9,000 feet long. A variety of considerations, including geology, shale thickness, and costs related to the amounts of gas produced by the wells determine lateral lengths.
