Seismic testing
From Wikimarcellus
(Difference between revisions)
| Revision as of 00:13, 6 October 2008 Tcopley (Talk | contribs) ← Previous diff |
Revision as of 20:59, 13 January 2009 Tcopley (Talk | contribs) Next diff → |
||
| Line 1: | Line 1: | ||
| - | '''Seismic testing''' or ''surveying'' is a technology used to search for pockets of natural gas. High tech trucks that hunt along rural roads of Appalachia can shoot [[seismic waves]] into the surrounding ground in order to discover geologic formations under fields, farms and homes. | + | '''Seismic testing''' or ''surveying'' is a technology used to search for pockets of natural gas. High tech ''vibrator'' trucks that hunt along rural roads of Appalachia can shoot [[seismic waves]] into the surrounding ground in order to discover geologic formations under fields, farms and homes. |
| A typical seismic survey in a forest preserve was described this way: | A typical seismic survey in a forest preserve was described this way: | ||
Revision as of 20:59, 13 January 2009
Seismic testing or surveying is a technology used to search for pockets of natural gas. High tech vibrator trucks that hunt along rural roads of Appalachia can shoot seismic waves into the surrounding ground in order to discover geologic formations under fields, farms and homes.
A typical seismic survey in a forest preserve was described this way:
Workers clear the vegetation and mulch down 4 ft. wide paths in a grid pattern throughout the woods being surveyed. Microphones are then connected via bright orange cables along the paths. Vibrator units mounted on buggies emit sound waves that go approximately five miles down into the ground. These waves reflect back off of underground rock formations, and are picked up by the microphones. The seismic data produced is then studied in order to decide where to drill.
The conventional wisdom on seismic testing is that it won’t tell you exactly which location to drill, but may help you figure out where not to.
